2013 Ford Taurus Fuel Pump: Complete Guide to Symptoms, Replacement Cost, and Best Options

The bottom line: If you own a 2013 Ford Taurus and your fuel pump is failing, expect a total replacement cost between $400 and $1,200 depending on your engine type, labor rates, and whether you choose an OEM or aftermarket part. The 2013 Taurus comes with three different engine options—3.5L V6, 2.0L EcoBoost, and 3.5L EcoBoost V6 (SHO)—and each requires a different fuel pump, so knowing your exact engine is critical before purchasing a replacement .

Understanding Your 2013 Ford Taurus Fuel Pump

The fuel pump in your 2013 Ford Taurus is an electric in-tank pump that draws fuel from the tank and delivers it under pressure to the engine's fuel injectors . Over time, fuel pumps wear out due to several factors:

  • Contaminants in the fuel that clog the pump's strainer and internal components
  • Running the tank consistently low, which causes the pump to overheat since it relies on fuel for cooling and lubrication
  • Normal age and mileage as the pump's internal brushes and motor wear down

The 2013 Taurus offered a diverse engine lineup, and the fuel pump type varies significantly by engine :

Engine Type Fuel Pump Type Approximate Fuel Pressure
3.5L V6 (Non-Turbo) Electric In-Tank 40-60 PSI
2.0L EcoBoost I4 Electric In-Tank 50-70 PSI
3.5L EcoBoost V6 (SHO) Electric In-Tank (High-Pressure) 60-80 PSI

The SHO's high-performance engine demands a fuel pump capable of delivering more fuel under higher pressure, which typically means a more robust and potentially more expensive pump .

Common Symptoms of a Failing Fuel Pump

Recognizing the warning signs early can save you from being stranded. Here are the most common symptoms of a bad fuel pump in a 2013 Ford Taurus :

  1. Engine sputtering or misfiring – A clogged or faulty fuel pump will fail to pump the necessary amount of gas into the combustion chambers, causing your engine to sputter or misfire, especially during acceleration .

  2. Difficulty starting – Your car may have trouble starting, requiring extended cranking before the engine kicks in. If the pump is not building adequate pressure, the engine won't fire up easily .

  3. Loss of power – You may notice a dramatic drop in power, especially when climbing hills or trying to accelerate quickly. The engine feels like it's choking or struggling to maintain speed .

  4. Engine stalling – A dying fuel pump can cause the engine to stall unexpectedly, particularly when driving at low speeds or idling .

  5. Surging engine – If too much fuel is sent to the engine, you'll notice the vehicle repeatedly picking up speed and then dropping speed without touching the gas pedal or brake .

  6. Poor gas mileage – A failing fuel pump that cannot maintain proper pressure will cause your engine to run inefficiently, reducing fuel economy .

  7. Whining noise from the fuel tank area – A healthy fuel pump makes a quiet hum. If you hear a loud whining or buzzing sound coming from the rear of the car near the fuel tank, your pump is likely failing .

2013 Ford Taurus Fuel Pump Replacement Cost

The cost to replace the fuel pump on a 2013 Ford Taurus varies widely based on several factors :

Labor costs: $200 to $400, depending on the mechanic's hourly rate and the complexity of the job. Replacing the fuel pump typically takes 2 to 4 hours .

Part costs: $200 to $400 for the replacement fuel pump itself, depending on the brand and whether it's an OEM or aftermarket part .

Total estimated cost:

  • At a general repair shop: $400 to $800
  • At a dealership: $1,122 to $1,241
  • Average overall: $1,000 to $1,200

Additional repairs may be necessary, such as replacing the fuel filter or fuel lines, which can add $50 to $200 to the total cost .

Replacement Procedure Overview

If you're planning to replace the fuel pump yourself, here's a general outline of the process. Always consult your vehicle's service manual for specific instructions :

  1. Safety first – Disconnect the negative battery cable and depressurize the fuel system according to your service manual's instructions .

  2. Access the fuel tank – On the 2013 Taurus, this usually involves removing the rear seat cushion and a metal access panel underneath .

  3. Disconnect fuel lines and electrical connectors – Carefully disconnect the fuel lines and electrical connections from the fuel pump module. Be extremely careful not to damage the plastic connectors or fuel lines .

  4. Remove the old pump assembly – The fuel pump sits inside the fuel tank and is attached to a plate on the top of the tank. Remove the retaining ring and lift out the entire assembly .

  5. Install the new pump – Transfer any necessary components from the old assembly to the new one (such as the fuel level float and seal), then install the new pump assembly in the reverse order.

  6. Test the system – Refill the fuel tank (at least a few gallons), reconnect the battery, and turn the key to the "ON" position several times to prime the fuel system before starting the engine. Check for leaks .

Why You Should Choose a KEMSO Fuel Pump for Your 2013 Ford Taurus

When it's time to replace your fuel pump, choosing the right brand matters. KEMSO Fuel Pumps offer a superior alternative to both OEM and cheap aftermarket options. Here's why KEMSO is the smart choice for your 2013 Ford Taurus:

High Performance & OEM Replacement – KEMSO fuel pumps are designed as direct OEM replacements for stock pumps that have gone faulty. Compared to your stock OEM fuel pump, KEMSO pumps deliver over 20% more flow at 43psi, making them ideal for daily drivers, performance applications, or simply replacing a failed pump .

Unrivalled Quality – KEMSO maintains strict quality control standards. Each pump is individually tested, with flow testing results verified before shipment. Unlike many cheap aftermarket suppliers, KEMSO has a proper Quality Control Program (ISO/TSO) .

Engineered for Flexibility – KEMSO fuel pumps are designed for use in many EFI applications and are compatible with both gasoline and E85/ethanol fuel .

Lifetime Confidence – KEMSO stands behind its products with a promise backed by a lifetime of confidence. When you buy a KEMSO fuel pump, you're investing in reliability that will last .

Complete Kit – Every KEMSO fuel pump comes as a complete kit with everything you need for installation: gradient density fuel strainer, flex hose, tank seal, Viton o-rings, plastic bracket, rubber base, crimp connectors, hose clamps, and zip-ties .

Visit KEMSO Racing today to find the perfect fuel pump for your 2013 Ford Taurus: https://www.kemsoracing.com/

Which Type of Fuel Pump Does Your Taurus Need?

The 2013 Ford Taurus fuel pump is not a one-size-fits-all part. Here's how to identify the correct pump for your vehicle:

For the 3.5L V6 (Non-Turbo) models – Most 2013 Taurus SE, SEL, and Limited trims came with the naturally aspirated 3.5L V6. These use a standard electric in-tank fuel pump assembly that operates at 40-60 PSI. The OEM part number is often listed as DG1Z9H307P or similar supersessions .

For the 2.0L EcoBoost models – Some 2013 Taurus SE and SEL trims came with the turbocharged 2.0L four-cylinder. These require a different fuel pump that operates at higher pressure (50-70 PSI). The OEM part number is DG1Z9H307N, and it's specifically for the 2.0L engine .

For the 3.5L EcoBoost SHO models – The high-performance SHO requires a high-pressure fuel pump capable of delivering 60-80 PSI. This is a different pump from the standard V6, and it's more expensive due to its higher flow requirements .

For Police Interceptor Sedan models – The 2013 Police Interceptor Sedan uses a similar fuel pump system to the Taurus, but it may have its own specific part numbers depending on engine choice (3.5L or 3.7L) .

Final Thoughts

A failing fuel pump on your 2013 Ford Taurus is not something to ignore. The symptoms—hard starting, sputtering, stalling, and loss of power—will only get worse over time, and driving with a dying pump can leave you stranded. The good news is that replacement is a straightforward repair, and you have excellent options when it comes to choosing a replacement part.

Remember these key points:

  1. Know your engine before buying a replacement pump. The 3.5L V6, 2.0L EcoBoost, and 3.5L EcoBoost SHO all use different pumps .
  2. Budget realistically – expect to pay between $400 and $1,200 for the complete replacement, with labor being roughly half the cost .
  3. Choose quality – a high-performance replacement like a KEMSO fuel pump not only restores your vehicle's performance but often improves it with 20% more flow than the stock pump .
  4. Don't delay – if you're experiencing any of the symptoms listed above, have your fuel pump checked immediately to avoid being stranded.

For the best combination of performance, reliability, and value, choose KEMSO for your 2013 Ford Taurus fuel pump replacement. Visit https://www.kemsoracing.com/ to browse their complete selection of high-quality fuel pumps backed by a lifetime of confidence.


Back to blog