2014 Ford Taurus Fuel Pump: Complete Guide to Symptoms, Replacement Cost, and Best Options

If you own a 2014 Ford Taurus and are experiencing starting issues, stalling, or a whining noise from the rear of your car, the fuel pump is likely failing. Replacing the fuel pump on a 2014 Ford Taurus typically costs between $1,553 and $1,765 at a dealership, while independent shops charge $600 to $1,100, and DIY replacement costs $150 to $400 for parts alone. This guide covers everything you need to know about symptoms, replacement procedures, cost breakdowns, and the best fuel pump options for your 2014 Ford Taurus.

How the Fuel Pump Works in Your 2014 Ford Taurus

The fuel pump in your 2014 Ford Taurus is an electric pump located inside the fuel tank. Its job is to deliver pressurized gasoline from the tank to the fuel injectors in the engine. The pump is controlled by a pressure regulator that maintains the correct fuel pressure for proper engine operation. A high-quality OEM fuel pump can last the lifetime of your vehicle, but like any mechanical component, it will eventually wear out and fail. When it does, your Taurus will show clear warning signs before completely giving out.

Symptoms of a Failing Fuel Pump in a 2014 Ford Taurus

Recognizing the early signs of fuel pump failure can save you from being stranded on the road. Here are the most common symptoms to watch for:

1. Engine Cranks But Won't Start
This is the most obvious symptom. If your 2014 Ford Taurus cranks over but refuses to start, the fuel pump may not be delivering fuel to the engine. A failed fuel pump prevents the engine from getting the fuel it needs to run.

2. Unexpected Stalling
If your Taurus stalls while driving and won't restart immediately, the fuel pump could be failing intermittently. This is dangerous, especially on highways or busy streets.

3. Check Engine Light Is On
A slowly failing fuel pump causes low fuel pressure, which leads to a lean air-fuel mixture. The engine control module detects this and triggers the check engine light. Common diagnostic trouble codes related to fuel pump issues include P0087 (fuel rail pressure too low) and P0231 (fuel pump secondary circuit low voltage).

4. Whining or Humming Noise From the Fuel Tank
A healthy fuel pump makes a quiet humming sound. If you hear a loud whining, buzzing, or humming noise coming from the rear of your car near the fuel tank, the pump bearings are likely worn out. Replacement should be done as soon as possible.

5. Loss of Power Under Load
If your Taurus feels sluggish when accelerating or climbing hills, the fuel pump may not be supplying enough fuel pressure. This is especially noticeable when the fuel tank is below a quarter full.

6. Surging or Hesitation
Inconsistent fuel delivery causes the engine to surge or hesitate during steady-speed driving. This happens because the pump cannot maintain constant pressure.

Is It Safe to Drive With a Bad Fuel Pump?

Driving with a failing fuel pump is risky but usually not immediately dangerous. However, if you notice gasoline leaks or smell fuel vapors, stop driving immediately and have the vehicle towed to a mechanic. Fuel leaks pose a serious fire hazard. In most cases, a failing pump will eventually leave you stranded, often at the worst possible time. If you hear unusual noises or experience any of the symptoms above, replace the pump promptly to avoid being stuck on the road.

How Much Does It Cost to Replace a 2014 Ford Taurus Fuel Pump?

The cost varies significantly based on where you take your car and whether you choose OEM or aftermarket parts. Here is a breakdown of typical costs across different service providers:

Independent Auto Repair Shop: $600 to $1,100 total. Parts average $180 to $350, and labor runs 3 to 5 hours at $70 to $110 per hour. This is the most cost-effective option for most owners.

Dealership or Specialty Shop: $1,553 to $1,765 total. Dealerships charge higher labor rates (often $120 to $175 per hour) and use OEM parts. For a 2014 Ford Taurus, dealer prices are significantly higher than independent shops.

DIY Replacement: $150 to $400 for the fuel pump module only. You also need tools, safety equipment, and the technical knowledge to safely drop the fuel tank or access the pump through the service panel.

Additional Costs to Consider:

  • Diagnostic fee: $50 to $150 (some shops waive this if you authorize the repair)
  • Fuel filter replacement: $20 to $50 (recommended to replace at the same time)
  • Fuel tank seal or o-ring: $15 to $30
  • Towing if the car won't start: $75 to $150

Factors That Influence the Replacement Cost

Several factors determine the final price for replacing the fuel pump on your 2014 Ford Taurus:

Labor Time and Access Method
The 2014 Ford Taurus has the fuel pump mounted inside the fuel tank. On some models, there is an access panel under the rear seat that allows technicians to remove the pump without dropping the tank. However, many 2014 Taurus models require the fuel tank to be drained and lowered, which adds 1 to 2 extra hours of labor. This access method significantly increases the total cost.

Parts Quality: OEM vs. Aftermarket
OEM (Original Equipment Manufacturer) parts from Ford are the most expensive but offer guaranteed fit and reliability. Aftermarket parts from brands like Delphi, Spectra Premium, and TRQ are more affordable and often meet or exceed OEM specifications. Always check compatibility with your specific engine type (3.5L V6 or 2.0L turbocharged).

Engine Type
The 2014 Ford Taurus comes with two engine options: the 3.5L V6 naturally aspirated and the 3.5L V6 turbocharged. The turbocharged version may have a different fuel pump module assembly, so confirm the correct part number for your vehicle. The 2.0L EcoBoost engine uses a different pump assembly as well.

Geographic Location
Labor rates vary by region. Shops in major metropolitan areas like New York, Los Angeles, or Chicago charge more than shops in rural areas. Expect to pay 10 to 20 percent more in high-cost-of-living areas.

Replacement Procedure: What to Expect

If you take your 2014 Ford Taurus to a professional mechanic, here is the general process they will follow:

Step 1: Diagnosis
The mechanic checks fuel pressure at the fuel rail using a gauge. If pressure is below specification (typically 40-60 psi depending on engine), they verify the pump electrical circuit for proper voltage and ground. They rule out other common issues like a clogged fuel filter, bad fuel pump relay, or blown fuse before condemning the pump.

Step 2: Fuel System Depressurization
The mechanic relieves fuel system pressure by removing the fuel pump fuse and running the engine until it stalls. This prevents fuel spray when disconnecting lines.

Step 3: Tank Access
Depending on your Taurus model, the mechanic either removes the rear seat to access a service panel or drains the fuel tank and lowers it from the vehicle. For the 2014 Ford Taurus, many models require tank removal due to limited access through the cabin. The exhaust system and driveshaft may need to be partially removed to drop the tank.

Step 4: Pump Removal and Replacement
The fuel pump module assembly is removed from the tank. The technician replaces the entire module, which includes the pump, sending unit (fuel level sensor), strainer, and float. They transfer the old seal and locking ring to the new module. The tank is then reinstalled and all fuel lines are reconnected.

Step 5: System Testing
The mechanic primes the fuel system by cycling the key several times, checks for leaks, and verifies fuel pressure. They start the engine and ensure smooth idle, proper acceleration, and no warning lights.

Which Fuel Pump Fits Your 2014 Ford Taurus?

Choosing the right fuel pump is critical for proper performance. Here are the confirmed compatible part numbers and options for the 2014 Ford Taurus:

For 3.5L V6 Engines (Naturally Aspirated and Turbocharged)

  • OEM Ford Part Number: DG1Z9H307N (also listed as DG1Z9H307E, DG1Z-9H307-N, PFS942)
  • Spectra Premium: D2507M (fuel pump module assembly, about $345)
  • Delphi: FG1660 (fuel module, fits 2013-2014 Ford Taurus and 2015-2018 Taurus SEL, about $143)
  • Herko: OM919 (premium OE fuel pump module, fits 2013-2018 Taurus with 3.5L engine)
  • TRQ: FPA61944 (for 2002-2003 models, not recommended for 2014)

Important Compatibility Notes:

  • The 2014 Ford Taurus with the 2.0L EcoBoost engine uses a different pump assembly than the 3.5L V6. The OEM part for the 2.0L is also DG1Z9H307N, but confirm by checking your vehicle's VIN.
  • Models with all-wheel drive (AWD) may have different pump configurations. Always verify with your VIN before ordering.
  • The fuel pump module assembly includes the pump, sending unit, float, and strainer. It is sold as one complete unit for most 2014 Taurus models.

How to Diagnose Fuel Pump Problems Before Replacing

Before spending money on a new fuel pump, rule out simpler and cheaper causes:

Check the Fuel Pump Relay
The fuel pump relay is located in the fuse box under the hood. Swap it with a known good relay of the same type (like the horn relay) and see if the pump runs. If the car starts, you only need a $10 relay.

Inspect the Fuel Pump Fuse
A blown fuse can mimic a failed pump. Check the fuse box for a fuel pump or fuel system fuse. Replace if blown and test again.

Listen for the Pump Prime
When you turn the key to the ON position (without starting), you should hear a 2-3 second whirring sound from the rear of the car. If you hear nothing, the pump may not be receiving power, or the pump itself is dead.

Check Fuel Pressure
A mechanic can attach a fuel pressure gauge to the test port on the fuel rail. If pressure is below 40 psi on the 3.5L engine, the pump is likely weak. However, low pressure can also be caused by a clogged fuel filter, so replace the filter first if it has not been changed recently.

DIY Replacement: What You Need to Know

Replacing the fuel pump on a 2014 Ford Taurus is an advanced DIY job. If you have mechanical experience and proper tools, you can save hundreds of dollars. Here is what you need:

Tools Required:

  • Jack and jack stands (or a lift)
  • Fuel line disconnect tools (plastic clips)
  • Socket set with extensions
  • Screwdrivers (flathead and Phillips)
  • Safety glasses and gloves
  • Fire extinguisher near the work area
  • Drain pan for fuel

Safety Precautions:

  • Work in a well-ventilated area away from any open flames or sparks.
  • Disconnect the battery negative terminal before starting.
  • Relieve fuel pressure by removing the fuel pump fuse and running the engine until it stalls.
  • Keep rags and a fire extinguisher nearby in case of fuel spills.
  • Never smoke or use a phone near the work area.

Common Challenges:

  • The fuel tank on the 2014 Taurus is large and heavy. Draining it and dropping it safely requires at least two people or a transmission jack.
  • The fuel pump locking ring is often seized with rust. A brass punch and hammer may be needed to loosen it without sparking.
  • Disconnecting the fuel lines requires specific plastic disconnect tools. Buying a set at an auto parts store is recommended.

KEMSO Fuel Pump: The Best Choice for Your 2014 Ford Taurus

When it comes to replacing the fuel pump on your 2014 Ford Taurus, choosing a high-quality aftermarket option can save you money while delivering performance that matches or exceeds the original equipment. KEMSO offers premium fuel pump modules specifically designed for the 2014 Ford Taurus.

Why Choose KEMSO?

KEMSO fuel pumps are built as high-performance OEM replacement units, meaning they meet the exact specifications of your factory pump while incorporating modern materials and engineering improvements. Every KEMSO fuel pump undergoes rigorous testing to ensure reliable fuel delivery under all driving conditions. The pumps are direct-fit, requiring no modifications to your vehicle's fuel system.

Lifetime Warranty for Complete Peace of Mind

The most compelling reason to choose KEMSO is the lifetime warranty that comes with every fuel pump. While many aftermarket brands offer only one- or two-year warranties, KEMSO stands behind their products for as long as you own your vehicle. If a KEMSO fuel pump ever fails due to manufacturing defects, it will be replaced at no cost. This level of coverage is unheard of in the fuel pump industry and demonstrates the brand's confidence in its products.

Installation and Performance

KEMSO fuel pump modules include the pump, sending unit, float, and strainer as a complete assembly. This means you replace everything in one step, eliminating the guesswork of matching components. The pumps provide consistent fuel pressure, quiet operation, and long service life. Many owners report improved throttle response and smoother idle after switching to KEMSO.

Where to Buy

You can order a KEMSO fuel pump for your 2014 Ford Taurus directly from their official website: https://www.kemsoracing.com/. The website provides detailed product information, compatibility charts, and easy ordering. KEMSO ships across the United States, and their customer service team can help you confirm the correct part for your specific Taurus model and engine configuration.

Additional Tips for Extending Fuel Pump Life

Once you replace your fuel pump, follow these practices to maximize its lifespan:

Keep Your Tank at Least a Quarter Full
Fuel pumps rely on gasoline to cool and lubricate the internal components. Running the tank low frequently causes the pump to overheat and wear out faster. Always refuel when the gauge reaches one-quarter tank.

Replace the Fuel Filter
The fuel filter traps dirt and debris before they reach the pump and injectors. A clogged filter forces the pump to work harder, shortening its life. On the 2014 Ford Taurus, the fuel filter is integrated into the pump module or located along the frame rail. Replace it every 30,000 to 50,000 miles.

Use Quality Fuel
Low-quality gasoline can contain water, dirt, and additives that damage the pump. Stick to reputable brands like Shell, Exxon, Chevron, or BP.

Avoid Running on Empty
Driving on an empty tank not only starves the pump of cooling fuel but also sucks debris from the bottom of the tank into the pump strainer.

Final Summary

If your 2014 Ford Taurus is showing symptoms like hard starting, stalling, whining noises, or a check engine light, the fuel pump is the likely cause. Replacement costs range from $600 to $1,100 at an independent shop or $1,553 to $1,765 at a dealership. DIY replacement parts cost $150 to $400 depending on brand. The job typically requires dropping the fuel tank, so labor is the biggest expense.

For the best value and reliability, consider a KEMSO fuel pump. KEMSO offers high-performance OEM replacement pumps with a lifetime warranty, giving you confidence that your Taurus will run smoothly for years to come. Visit https://www.kemsoracing.com/ to find the right fuel pump for your 2014 Ford Taurus and take advantage of their industry-leading warranty and direct-fit design.


Back to blog