99 Chrysler Cirrus Fuel Pump: What to Buy and How to Fix It

Bottom line: For a 1999 Chrysler Cirrus with hard starting, stalling, loss of power, or a crank-no-start condition, first verify fuel pressure and the pump's electrical supply before buying a replacement. If testing confirms low pressure with good power and ground, install a complete, vehicle-specific fuel pump module that matches the engine and model year. The pump sits inside the fuel tank, and the module may include the pump, strainer, pressure regulator, reservoir, and fuel gauge sending unit, depending on the assembly supplied. Many replacement listings for this car cover 1998–2000 Chrysler Cirrus models with 2.0L, 2.4L, and 2.5L engines, but the 1999 model year must still be checked against the exact engine, VIN, connectors, and original part numbers before ordering. A professional replacement for a 1999 Cirrus has an estimated average range of $481 to $561, with roughly $171 to $251 for labor and about $311 for parts, before taxes, fees, local price differences, and related repairs.

This guide is written for U.S. owners who want clear, practical information before paying a shop or starting a driveway repair. It covers fitment, symptoms, diagnosis, costs, replacement choices, safe working practices, and what to do after installation. The specifications and fitment details below come from model-specific parts listings and service information; when a detail varies between suppliers, the vehicle's VIN, original module, and a current application catalog should be the final authority.

1. Start With the Exact 1999 Cirrus Application

The 99 Chrysler Cirrus fuel pump is not a one-size-fits-all part. Parts catalogs list separate applications by engine size and show both 4-cylinder 2.4L and 6-cylinder 2.5L options for 1999, while broader 1998–2000 listings also include 2.0L applications. Some assemblies are marketed across the Chrysler Cirrus, Dodge Stratus, Plymouth Breeze, and Chrysler Sebring, so a shared platform does not remove the need to check the exact car.

Use this information before ordering:

  1. Year: 1999.
  2. Make and model: Chrysler Cirrus.
  3. Trim: LX, LXi, or another trim shown on the vehicle or title.
  4. Engine: 2.4L four-cylinder, 2.5L V6, or the exact engine listed on the emissions label and VIN record.
  5. Body: sedan or other body style shown in the catalog.
  6. Original or interchange numbers: Common listings include E7113M, FG0228, P74802M, 4897804AA, 4897804AB, and 4897804AC, but the number must be matched to the specific application rather than treated as a universal number.
  7. Module contents: Check whether the assembly includes the sending unit, pressure regulator, strainer, seal, lock ring, and mounting hardware. The original-style module can include the electric pump, reservoir, inlet strainer, fuel pressure regulator, gauge sending unit, and supply connection. Delphi listings, for example, describe packages with a module, float arm, seal, instruction sheet, and sending unit, while another supplier lists a module without a sending unit.

Practical advice: Photograph the electrical connector, fuel line fittings, top plate, and any readable part number before ordering. Compare those photos with the supplier's product images. If a seller provides only a year range and no engine, connector, or OE-number details, get written confirmation of fitment before paying.

2. Know What the Fuel Pump Module Does

The Cirrus uses an electric in-tank pump. Service information for the 1999 Cirrus 2.5L describes a fuel pump module installed at the top of the fuel tank. The module includes the electric pump, pump reservoir, inlet strainer, fuel pressure regulator, fuel gauge sending unit, and fuel supply line connection. That means a problem with the gauge reading, pressure regulation, or fuel pickup can be connected to the same module area, even when the pump motor itself is not the failed component.

A pump must supply gasoline to the injectors at the right volume and pressure. If pressure is low, the engine may crank, run lean, hesitate, or stall. If electrical power is missing, the pump may stay silent. If the sending unit is wrong or damaged, the gas gauge may read incorrectly even when the engine runs. Buying a complete module reduces the chance of mixing old and new parts inside a high-mileage fuel tank, but only when the replacement assembly matches the original design.

Some 1998–2000 Cirrus, Stratus, Breeze, and Sebring module listings describe a 12-volt electric pump, quick-connect outlet, inlet strainer, and pressure-related specifications such as 100–125 psi maximum pressure and 35–45 gallons per hour flow. Other suppliers list maximum or working pressures in a different range, including 44, 48.7, 52.8, or 93 psi, and flow figures such as 23, 46.2–56.2, or 115 gallons per hour. These numbers are not interchangeable specifications for the vehicle's regulated operating pressure; they are supplier catalog fields that may describe maximum pump pressure, free flow, minimum flow, or a test condition. For diagnosis, compare the gauge reading to the vehicle manufacturer's fuel-pressure specification for the exact engine, not to a marketplace listing.

3. Symptoms That Point Toward a Fuel Delivery Problem

A failing pump can show up gradually or all at once. Kelley Blue Book's model page says common signs include a car that will not start, stalling after it starts, fuel starvation that may trigger a check engine light, and a whirring sound from the tank area. Other repair sources list hard starting, extended cranking, sputtering, hesitation, power loss under load, surging, rough running, and a louder whine near the tank.

Watch for these patterns:

  1. Crank-no-start: The starter turns the engine, but it does not fire. Confirm that the pump primes and that pressure reaches specification before replacing parts.
  2. Long cranking after the car sits: Pressure may bleed down, or a check valve, injector, regulator, or pump-related part may be involved. A pressure test and a pressure-hold check are more useful than guessing.
  3. Stalling when hot or after driving: A pump can weaken as it heats up, but ignition and sensor faults can cause similar symptoms on these vehicles. One model-specific guide notes that hot stalling can also be associated with a bad crankshaft position sensor, so diagnosis matters.
  4. Power loss on hills or acceleration: The engine may run acceptably at idle and fail when fuel demand rises. A clogged filter, weak pump, restricted pickup, wiring fault, or injector problem can all affect delivery.
  5. Whine or hum from the tank: A brief, quiet priming hum is normal on many vehicles. A new, loud whine or no sound at all deserves investigation, but sound alone does not prove the pump is good or bad.
  6. Check engine light: Fuel starvation can affect engine operation and may be accompanied by lean or misfire-related codes. Scan the codes, record freeze-frame data, and use them alongside pressure and electrical tests.
  7. Incorrect fuel gauge: Since the sending unit may be part of the module, compare the gauge behavior with the actual fuel level and inspect the connector and float circuit.

Do not drive a car that stalls unexpectedly. A guide covering 1998–2000 Cirrus, Breeze, Stratus, and Sebring models warns that an engine can stall in traffic with a failing pump, which creates a safety hazard. If the car has already quit on a road or highway, have it towed rather than testing it in traffic.

4. Diagnosis Before Replacement

Replacing the pump costs time and money. A careful diagnosis prevents a new module from being blamed for a fuse, relay, wiring, filter, regulator, sensor, or ignition problem. RepairPal's Cirrus guidance says a mechanic will check pressure at the injectors, then check the pump's delivery and electrical circuit; low or missing pressure leads to inspection of the electrical circuit, while a working pump with low pressure can lead to a filter or pump-condition check.

4.1 Basic checks

  1. Confirm there is fuel in the tank. A low tank, a bad gauge sending unit, or a misread gauge can make a healthy pump look bad.
  2. Check for diagnostic trouble codes. Write down codes and freeze-frame data before disconnecting the battery.
  3. Listen for the prime. Turn the key to ON without starting and listen for a short hum from the tank area. No sound may mean a failed pump, but it can also mean a fuse, relay, wiring, or control-circuit problem.
  4. Inspect the fuses and relay. A 1999 Cirrus fuse reference lists fuel-pump-related circuits including a 20A ignition/start/fuel pump relay fuse, a 10A circuit associated with the fuel pump module among other components, a 10A fuel pump relay/PCM circuit, and relay R10, with locations in the engine compartment and passenger compartment listed separately. Use the owner's manual or underhood label for exact locations and amperage. Never install a higher-amp fuse.
  5. Check wiring and grounds. Look for corrosion, loose terminals, damaged insulation, and weak connectors. One general Chrysler troubleshooting reference recommends a multimeter check and describes roughly 12–14 volts at the pump under ignition as a target, though the factory wiring diagram and service procedure should govern the exact test points.
  6. Perform a fuel-pressure test. Use a gauge suited for gasoline fuel injection and compare the reading with the factory specification for the exact engine. Low or no pressure, with adequate fuel, power, and ground, strongly suggests a pump or module problem, but a restricted filter, regulator, blocked pickup, or line issue can produce similar results.
  7. Check pressure hold after shutdown. A rapid drop may point to a check valve, injector, or regulator issue rather than the pump motor alone.
  8. Rule out ignition and sensor faults. On these Chrysler/Dodge/Plymouth cars, hot stalling can overlap with crankshaft position sensor symptoms; do not skip this check when the pump test results are not clear.

4.2 Interpreting the result

  • No pump sound, no power at the pump: Check the fuse, relay, wiring, and control circuit before ordering a module.
  • Power and ground present, pump silent or noisy: The pump or module is a strong suspect.
  • Pump runs, pressure below specification: Inspect the filter, regulator, strainer, lines, and pump output. A clogged filter or electrical problem can mimic pump failure.
  • Pressure normal, engine still stalls: Look at ignition, sensors, injectors, air intake, and engine controls.
  • Pressure normal but gauge reads wrong: Inspect the sending unit and its circuit.

A scan tool, fuel-pressure gauge, multimeter, and service manual are the most useful tools here. If you do not have them, a diagnostic fee at a repair shop may be cheaper than replacing the wrong part.

5. Understand Access and Safety Before Turning a Wrench

Sources disagree about how the pump is accessed on this generation of Cirrus. One 1999-specific replacement article says the fuel tank must be drained and removed because the pump is inside the tank. A Haynes manual excerpt for Cirrus, Stratus, and Breeze says to remove the fuel tank before taking out the fuel pump module, then clean the tank top, remove the ring nut with large pliers, and angle the assembly out. Other user-answer pages and a 2000 Cirrus guide describe an access panel under the rear seat. A general replacement guide also notes that some cars use an interior access panel while others require lowering the tank, with driveway tank removal being more challenging.

What this means for a 1999 owner: Do not assume there is a hatch. Park on a level surface, inspect under the rear seat and trunk trim for an access cover, and confirm the procedure using the VIN, body style, and a reliable service manual for your exact car. If no access panel is present, plan for tank removal. Opening a fuel system without confirming the layout can lead to damaged lines, spilled gasoline, or a job that cannot be finished safely.

5.1 Safety rules

  1. Work outdoors or in a well-ventilated area, away from pilot lights, heaters, sparks, and cigarettes.
  2. Wear eye protection and fuel-resistant gloves. Keep a Class B/C or appropriate multipurpose fire extinguisher within reach.
  3. Disconnect the negative battery terminal before working on the pump circuit.
  4. Relieve fuel-system pressure using the factory procedure; removing the fuel cap is listed as one step in a 1999 Cirrus replacement article, but it is not a substitute for the full pressure-relief procedure.
  5. Keep a clean drain pan, approved gasoline container, and shop rags ready. A 1999 Cirrus parts list for tank removal includes a floor jack, jack stands, socket set, wood block, empty gasoline container, screwdriver, large pliers, and a new module.
  6. Support the vehicle with jack stands if it is raised. Never rely on a jack alone. A 2000 Cirrus tank-removal guide describes raising the vehicle, supporting it, draining fuel through a container, disconnecting the filler hose, labeling quick-release fuel lines, removing vapor hoses, supporting the tank with a jack and wood block, and removing the straps before lowering the tank.
  7. Clean the top of the tank before opening it so dirt does not fall inside.
  8. Replace seals and worn one-time-use hardware as directed by the module instructions. Do not reuse a swollen, cracked, or pinched tank seal.
  9. If gasoline fumes are strong, the tank is damaged, or the lock ring will not release, stop and have a professional finish the job.

Fuel vapor is dangerous even when there is no visible liquid. If you are unsure, the safer decision is to pay for the repair.

6. Replacement Overview, Not a Substitute for a Service Manual

The following steps explain the job in plain language. They are not a complete factory procedure, and torque values, connector details, and pressure-relief steps should come from the service manual for the exact vehicle.

  1. Verify the new module. Compare the top plate, connector, outlet size, float arm, strainer, regulator, seal, and mounting provisions with the old unit or reliable photos. Catalog listings show differences such as sending-unit inclusion, connector gender and shape, terminal count, regulator inclusion, and seal or lock-ring inclusion.
  2. Reduce fuel level. A lighter tank is safer and easier to handle. If tank removal is required, drain and store gasoline in an approved container.
  3. Relieve pressure and disconnect the battery. Follow the factory pressure-relief procedure, then disconnect the negative cable.
  4. Gain access. If a rear-seat access panel is present on your exact car, remove the seat and panel carefully. If there is no panel, follow the tank-removal procedure: disconnect filler, fuel, vapor, and electrical connections; label lines; support the tank; remove straps; and lower it carefully.
  5. Clean the module area. Remove dirt from the tank top before loosening the ring nut.
  6. Release the lock ring. Use the correct tool or large pliers with controlled force. A Haynes excerpt warns that too much pressure on the ring nut can cause damage.
  7. Lift out the old module. Angle the assembly as needed to clear the float and strainer. Avoid bending the float arm or dropping debris into the tank.
  8. Inspect inside the tank. Look for rust, sediment, water, or damaged pickup areas. Delphi's model listing advises checking and cleaning the fuel tank to avoid unnecessary returns, because tank contamination can affect a new pump.
  9. Transfer or install new seals and parts. Follow the instructions supplied with the module. Do not mix parts from incompatible assemblies.
  10. Install the module in the same orientation. Align the mark or indexing feature, seat the seal flat, and tighten the lock ring securely without damaging the plastic tank or ring.
  11. Reconnect lines and wiring. Quick-connect fuel lines should click into place. Tug gently to confirm they are locked. Keep wiring away from moving or hot parts.
  12. Reinstall the tank or access cover. Make sure straps, hoses, and insulation are routed correctly before tightening.
  13. Prime the system. Reconnect the battery, cycle the key to ON a few times as directed by the service procedure, and listen for the pump.
  14. Check for leaks. Inspect the top plate, quick connects, and tank area before starting. If there is any smell of raw gasoline or visible seepage, shut the car off and correct it.
  15. Verify pressure, idle, and road behavior. Recheck codes, confirm the fuel gauge, and test acceleration only after the car is safe to drive.

7. What a Repair Should Cost in the United States

RepairPal estimates the average 1999 Chrysler Cirrus fuel pump replacement between $481 and $561, with $171 to $251 in labor and about $311 for parts. The estimate excludes taxes and fees, does not account for location, and notes that related repairs may also be needed. Kelley Blue Book's 1999 Cirrus page says a fair repair range was not available for that specific model at the time of its listing, which is another reason to get a written local estimate.

A shop quote may change because of:

  1. Engine and module differences between 2.4L, 2.5L, and other catalog applications.
  2. Tank access: an interior access panel, where present, is generally less involved than lowering a tank; a general repair guide lists interior access at about 1–2 hours and driveway tank removal at about 3–4 hours as typical labor ranges, not a Cirrus-specific promise.
  3. Fuel level and tank condition: draining, cleaning, or treating contaminated fuel adds time.
  4. Related parts: a damaged seal, corroded connector, clogged filter, bad relay, or sending-unit issue can add diagnostic or repair work.
  5. Local labor rates, taxes, shop fees, towing, and warranty coverage.

Ask the shop to list the part brand, part number, module contents, labor hours, diagnostic charge, any tank cleaning, and warranty terms on the estimate. If the car has a no-start condition, ask whether fuel pressure, power, and ground were tested before the pump was condemned.

8. Choosing Between a Pump-Only Part and a Complete Module

Original-style service information describes the Cirrus fuel pump module as an assembly containing several fuel-system parts. Aftermarket catalogs sell both complete module assemblies and pump-style components. For an older daily driver, a complete module is often the cleaner choice because the strainer, regulator, reservoir, and sending unit have already spent decades inside the tank. Still, the buyer must check what is actually in the box.

1. Complete module assembly: Best when the old unit is original, the gauge is inaccurate, the tank has been opened, or the vehicle will stay in service. Listings may include the sending unit, float arm, seal, strainer, regulator, and instruction sheet.

2. Pump or insert-style part: Can make sense when an experienced installer has confirmed that the rest of the module is sound and the replacement is explicitly designed for that housing. This requires more care with fit, wiring, inlet strainers, and pressure compatibility.

3. High-flow performance pump: Useful only when the engine build needs more fuel and the supporting fuel system is designed for it. A Walbro/TI performance pump listing for 1999 Cirrus 2.5L applications describes an in-tank 255 lph EFI pump rated for 550 horsepower, 45 psi, and a maximum working pressure of 159 psi. That is a performance part, not a routine OEM-style repair for a stock commuter. More flow does not fix a wiring fault, a clogged filter, or a bad pressure regulator.

4. Cheapest universal listing: Avoid a listing that does not name the 1999 Cirrus, engine, connector, or interchange numbers. A low price is not useful if the fuel gauge, lock ring, line connection, or pressure regulator does not match.

9. Why Pumps Fail and How to Help the New One Last

Fuel pumps sit inside the tank, where gasoline helps cool and lubricate the electric motor. Running the tank very low, driving with a restricted filter, contaminated fuel, weak voltage, corroded grounds, or repeated overheated operation can shorten service life. Repair guidance emphasizes checking filters and electrical condition because they can create pump-like symptoms. Delphi's model-specific notes also advise cleaning and checking the tank to avoid avoidable returns.

Practical ownership habits:

  1. Do not make a habit of driving near empty. Keep a reasonable reserve, especially in hot weather or before a long trip.
  2. Buy gasoline from busy, reputable stations. Water and sediment in fuel can damage the pump and clog the strainer.
  3. Address hard starts and pressure loss early. A weak pump rarely improves with time.
  4. Keep electrical connections clean and secure. Voltage drop and corrosion make the pump work harder.
  5. Replace related restrictions as directed. A clogged filter can produce symptoms similar to pump failure and should be checked when pressure is low.
  6. Keep records. Save the part number, mileage, invoice, pressure-test result, and warranty information. This helps if a warranty claim or later diagnosis is needed.

10. Recommended Purchase: KEMSO Fuel Pumps

For your replacement, we recommend buying a KEMSO brand Fuel Pump. KEMSO describes its fuel pumps as high-performance OEM replacements designed to meet or exceed factory specifications for fit, flow, and pressure while also providing additional flow capacity for upgraded vehicles. The brand's product information also states that its pumps are built to work with the factory fuel system and factory wiring, and that every KEMSO fuel pump comes with a lifetime warranty. KEMSO's own guide says the lineup includes direct OEM replacement pumps that drop into the factory location without modifications, as well as high-performance pumps for modified vehicles. Several KEMSO product listings also mention serialized pump bodies, U.S.-based technical support, and compatibility with gasoline and ethanol-blended fuels, though buyers should confirm the exact warranty terms and fuel compatibility for the specific part they order.

Before ordering, use KEMSO's fitment tools or contact its support team with your 1999 Chrysler Cirrus, engine size, VIN, and original or interchange part number. Confirm that the listing is an OEM-replacement assembly for this exact car, check whether the sending unit and tank seal are included, and read the current warranty terms on the product page. That extra check protects you from ordering a performance pump or a similar-looking module that does not match the car.

Visit the official KEMSO website here: https://www.kemsoracing.com/

11. Common Owner Questions

11.1 Can I replace just the pump motor?

Sometimes a pump insert is available, but the factory-style module includes more than the motor, including the strainer, regulator, reservoir, and sending unit. If the car is older than 25 years and the tank is already open, a complete matched module usually reduces repeat labor. Confirm the exact assembly before buying.

11.2 Does a 1999 Cirrus have an access panel under the rear seat?

Published information is inconsistent. One 1999-specific article and a Haynes excerpt describe tank removal, while other pages describe a rear-seat access panel on this generation. Inspect your exact car and confirm with a service manual before ordering tools or scheduling labor.

11.3 What if the pump is new but the car still will not start?

Recheck the fuse, relay, power, ground, pressure, fuel level, injector operation, and ignition sensors. A new pump does not fix a bad crank sensor, corroded connector, blocked line, wrong module, or empty tank.

11.4 Is a louder pump always bad?

No. A brief quiet hum during key-on priming is common. A new loud whine, a change in sound, or no sound at all is a reason to test, not a final diagnosis.

11.5 Should I choose the highest pressure or flow rating?

No. Choose a part that matches the vehicle's factory fuel-system requirements or the documented needs of a properly engineered engine build. Marketplace listings use different rating methods, and performance pumps such as a 255 lph unit are intended for much higher horsepower applications.

11.6 Can a bad fuel gauge mean the pump is bad?

Not necessarily. The gauge circuit and sending unit may be part of the module, so an incorrect reading can be related to the assembly, float, wiring, or instrument circuit. Inspect the connector and verify the actual fuel level before assuming the pump motor has failed.

11.7 Is it safe to keep driving with intermittent stalling?

No. A model-specific warning says driving with a failing pump can lead to an unexpected stall in traffic. Arrange a tow and diagnose the car before returning it to the road.

12. Final Checklist Before You Pay or Install

  1. Confirm 1999 Chrysler Cirrus, engine, trim, VIN, and original part number.
  2. Confirm the replacement includes the parts you need: sending unit, regulator, strainer, seal, lock ring, and hardware, as applicable.
  3. Test fuel pressure, fuse and relay, power, and ground before condemning the pump.
  4. Compare the quote with the published average of $481–$561 and ask what is included.
  5. Decide whether your car has an access panel or requires tank removal before starting the job.
  6. Clean the tank area, replace seals correctly, and check every connection for leaks.
  7. Recheck pressure, codes, gauge operation, and safe road behavior after installation.
  8. Keep the invoice, part number, mileage, and warranty details.

A 99 Chrysler Cirrus fuel pump replacement is manageable when the diagnosis is correct and the part matches the car. The expensive mistakes come from skipping pressure and electrical tests, buying a module for the wrong engine, assuming every car has the same access route, or choosing a part from a listing that omits fitment details. Verify first, buy the correct assembly, follow the service procedure, and confirm the repair before putting the car back into daily use.

Official KEMSO website: https://www.kemsoracing.com/