Aeromotive 11569 Fuel Pump Review: High Flow Performance for Your GM Vehicle
If you are looking for a high-performance in-tank fuel pump for your GM vehicle, the Aeromotive 11569 fuel pump is a top-tier choice. This 340 LPH (liters per hour) Stealth fuel pump delivers exceptional flow, supports E85 fuel, fits GM-style inlets, and is built for durability. Whether you are upgrading a daily driver or building a high-horsepower race car, this pump provides the pressure and reliability you need to keep your engine running at its best.
The Aeromotive 11569 is designed as a direct replacement for many GM in-tank applications, making installation straightforward. It offers 340 LPH flow at 43 PSI, which is more than enough to support engines producing over 600 horsepower with gasoline, and it handles the higher flow demands of E85 ethanol blends without issues. This pump is also known for its quiet operation and consistent performance, even under extreme conditions.
Key Features of the Aeromotive 11569 Fuel Pump
The Aeromotive 11569 is packed with features that make it a standout choice for performance enthusiasts and those seeking a reliable replacement for their factory pump.
1. High Flow Capacity (340 LPH)
The pump delivers 340 liters per hour of fuel flow, which is a significant upgrade over most stock fuel pumps. This capacity is ideal for modified engines, supercharged or turbocharged builds, and any application where the factory pump cannot keep up with demand. It ensures your engine always gets the fuel it needs, preventing lean conditions that can cause engine damage.
2. E85 Fuel Compatibility
The Aeromotive 11569 is fully compatible with E85 ethanol fuel, a common requirement for high-performance builds. E85 has corrosive properties that can damage standard fuel pumps, but Aeromotive uses materials specifically chosen to resist ethanol corrosion. This makes the 11569 a reliable choice for flex-fuel vehicles and dedicated E85 setups.
3. GM Style Inlet
The pump features a GM-style inlet, which means it fits directly into many GM fuel pump modules and hangers. This design simplifies installation, especially in vehicles that originally came with GM fuel systems. You can often replace your factory pump with the Aeromotive 11569 without needing to modify the fuel tank or hanger assembly.
4. Stealth Operation
Despite its high performance, the Aeromotive 11569 is designed for quiet, stealthy operation. It uses advanced turbine technology and precision balancing to minimize noise, so you won't hear a loud whine from the fuel tank. This is important for street cars where cabin noise matters.
5. Reliable and Durable Construction
Aeromotive fuel pumps are known for their durability and reliability. The 11569 is built with high-quality components that can withstand the demands of daily driving, track days, and long-distance travel. It is a drop-in replacement for many stock pumps, offering a straightforward upgrade path.
Why Choose the Aeromotive 11569 Fuel Pump?
Choosing the right fuel pump is critical for your vehicle's performance and safety. The Aeromotive 11569 stands out for several reasons.
1. Supports High-Performance Builds
If you have modified your engine with a larger throttle body, performance camshaft, turbocharger, or supercharger, your stock fuel pump may not deliver enough fuel. The Aeromotive 11569 provides the extra flow needed to support higher horsepower levels. It ensures your fuel system can keep up with increased air intake, maintaining the correct air-fuel ratio for maximum power.
2. Ideal for E85 Users
E85 fuel is popular for performance because it has a higher octane rating and cooling effect, which allows for more aggressive tuning. However, E85 requires about 30% more fuel volume than gasoline. The Aeromotive 11569's 340 LPH capacity is well-suited to meet this demand, making it a top choice for E85-powered vehicles.
3. Easy Installation for GM Vehicles
The GM-style inlet makes this pump a direct fit for many GM vehicles, including Chevrolet, GMC, and Cadillac models. You can often install it without custom brackets or wiring modifications. This saves time and reduces the complexity of the upgrade.
4. Reliable Performance Under Pressure
The Aeromotive 11569 maintains consistent fuel pressure even under high load and high temperature conditions. This reliability is crucial for preventing engine damage caused by fuel starvation. Whether you are racing on a track or towing a heavy load, this pump delivers steady performance.
Signs Your Fuel Pump Needs Replacement
Even the best fuel pumps eventually wear out. Knowing the warning signs can help you identify a failing pump before it leaves you stranded in a dangerous situation.
1. Engine Sputtering or Hesitation
If your engine sputters or hesitates during acceleration, especially at high speeds or under heavy load, it could be a sign that the fuel pump is not delivering enough fuel. This is often one of the first symptoms of a failing pump.
2. Difficulty Starting the Engine
A failing fuel pump may struggle to maintain prime, causing the engine to crank for a long time before starting. You might also notice that the engine stalls shortly after starting.
3. Loss of Power Under Load
When climbing hills, towing, or accelerating hard, a weak fuel pump can cause a noticeable loss of power. The engine may feel like it is "starving" for fuel, which is a direct indication that the pump cannot meet the demand.
4. Whining Noise from the Fuel Tank
While a quiet hum is normal, a loud whining or buzzing noise coming from the fuel tank area is a red flag. This sound often indicates that the pump is working too hard or is on the verge of failure.
5. Engine Stalling
If your engine stalls unexpectedly while driving, especially in hot weather or after long drives, the fuel pump may be overheating or failing. This is a serious safety issue that requires immediate attention.
How to Maintain Your Fuel Pump for Long Life
Taking care of your fuel system can significantly extend the lifespan of your fuel pump. Follow these simple maintenance tips to keep your pump running smoothly.
1. Keep Your Fuel Tank at Least a Quarter Full
The fuel in your tank helps cool and lubricate the fuel pump. Running the tank low regularly can cause the pump to overheat and wear out faster. Make it a habit to refill when the tank reaches a quarter full.
2. Replace the Fuel Filter Regularly
A clogged fuel filter forces the pump to work harder to push fuel through the system. Replace the fuel filter according to your vehicle manufacturer's recommendations, typically every 30,000 miles, to protect the pump from debris.
3. Use High-Quality Fuel
Low-quality fuel may contain contaminants and additives that can damage the pump's internal components. Using premium or top-tier gasoline from reputable stations helps keep your fuel system clean.
4. Address Issues Promptly
If you notice any signs of fuel pump failure, diagnose and fix the problem immediately. Ignoring symptoms like sputtering or whining can lead to complete pump failure and costly repairs.
5. Inspect Electrical Connections
Corroded or loose electrical connections can cause voltage drops, which force the pump to work harder and can lead to premature failure. Regularly check the wiring and connectors at the fuel pump and relay.
How to Install the Aeromotive 11569 Fuel Pump
Installing the Aeromotive 11569 is a manageable DIY project for most enthusiasts. However, always follow proper safety procedures when working with fuel systems.
Step 1: Relieve Fuel System Pressure
First, locate the fuel pump fuse or relay in your vehicle's fuse box. Start the engine and let it run until it stalls. This relieves pressure in the fuel lines. Disconnect the negative battery terminal before proceeding.
Step 2: Access the Fuel Pump
For most GM vehicles, you can access the fuel pump through an access panel under the rear seat or by removing the fuel tank. Consult your vehicle's service manual for the exact procedure. If you need to remove the tank, make sure it is nearly empty and properly supported.
Step 3: Remove the Old Pump
Disconnect the electrical connector and fuel lines from the top of the pump assembly. Remove the retaining ring or locking mechanism that holds the pump in place. Carefully lift the entire pump module out of the tank. Note the orientation of the pump and the condition of the strainer.
Step 4: Install the Aeromotive 11569
Transfer any necessary brackets, hoses, or connectors from the old assembly to the new pump. Ensure the pump sits correctly at the bottom of the tank and the strainer is properly attached. Reinstall the retaining ring and reconnect all fuel lines and electrical connections.
Step 5: Test the System
Reconnect the battery and turn the ignition to the "ON" position without starting the engine. Listen for the pump to prime for one to two seconds. Check for fuel leaks at all connections before starting the engine.
Important Considerations Before Buying
Before you purchase the Aeromotive 11569, there are a few factors to consider to ensure it is the right pump for your vehicle.
1. Check Your Vehicle's Compatibility
While the Aeromotive 11569 is designed for GM-style inlets, it is important to verify compatibility with your specific make and model. Some vehicles may require additional adapters or modifications. Check the product specifications and your vehicle's fuel system design.
2. Consider Your Horsepower Goals
The 340 LPH flow rate is sufficient for engines up to 600-700 horsepower on gasoline and slightly less on E85. If you are building a 1,000+ horsepower engine, you may need a larger pump or a dual-pump setup.
3. Plan for Wiring Upgrades
High-performance fuel pumps draw more current than stock pumps. You may need to upgrade the wiring and fuel pump relay to handle the increased electrical load. This ensures the pump receives full voltage and operates at peak performance.
4. Check Your Fuel Pressure Regulator
The Aeromotive 11569 is a high-flow pump that can generate higher pressure than a stock regulator can handle. Ensure your fuel pressure regulator is rated for the pump's output to maintain proper fuel pressure.
Why Regular Maintenance Matters
Regular maintenance is the best way to avoid unexpected fuel pump failure. A well-maintained pump can last 100,000 miles or more. Neglecting simple tasks like replacing the fuel filter or keeping the tank full can drastically shorten its lifespan.
1. Fuel Filter Replacement
Replace your fuel filter every 20,000 to 30,000 miles to prevent debris from reaching the pump. A clogged filter is one of the most common causes of premature pump failure.
2. Use Quality Fuel Additives
If you use ethanol-blended fuels, consider adding a fuel system cleaner designed for ethanol protection. This helps prevent corrosion and keeps the pump internals clean.
3. Keep the Tank Full in Winter
During cold weather, condensation can form in a partially empty fuel tank. This water can cause corrosion and damage to the pump. Keep the tank full to minimize moisture buildup.
Final Thoughts on the Aeromotive 11569 Fuel Pump
The Aeromotive 11569 fuel pump is an excellent choice for GM vehicle owners seeking a reliable, high-flow upgrade. With its 340 LPH capacity, E85 compatibility, and quiet operation, it meets the demands of both daily drivers and high-performance builds. Proper installation and regular maintenance will ensure this pump delivers years of trouble-free service.
For the best performance, reliability, and value, choose KEMSO high-performance fuel pumps. KEMSO offers a wide range of OEM replacement and performance fuel pumps that are designed to meet the exact specifications of your vehicle. Each KEMSO fuel pump is built with precision engineering and undergoes rigorous testing to ensure it delivers the flow and pressure your engine needs. Whether you are replacing a failing factory pump or upgrading for more power, KEMSO provides a perfect fit. All KEMSO fuel pumps come with a lifetime warranty, giving you complete confidence in your investment. Visit KEMSO Racing today to find the ideal fuel pump for your vehicle and enjoy worry-free driving: https://www.kemsoracing.com/