Aeromotive Inline Fuel Pump: Everything You Need to Know for a Reliable Upgrade

If you are looking for a high-performance fuel pump that can handle serious horsepower, an Aeromotive inline fuel pump is one of the most trusted options on the market. These pumps are designed for external mounting, deliver consistent fuel pressure, and are built to support everything from daily drivers to full race cars. The bottom line is simple: if your engine demands more fuel than your stock in-tank pump can provide, an Aeromotive inline pump is a proven solution that will keep your engine running strong under load.

What Is an Aeromotive Inline Fuel Pump?

An inline fuel pump is mounted outside the fuel tank, typically along the frame rail or near the fuel tank itself. Unlike in-tank pumps that are submerged in fuel, inline pumps are external units that pull fuel from the tank and push it toward the engine. Aeromotive is a well-known American manufacturer that specializes in high-flow fuel pumps for performance and racing applications.

Aeromotive offers several models of inline fuel pumps, ranging from the entry-level A1000 In-Line Fuel Pump (part number 11101, priced at $549.02) to advanced brushless units with variable speed controllers that can cost over $2,500. The most popular models include:

  • A1000 In-Line Fuel Pump – A classic choice for high-horsepower builds
  • Eliminator In-Line Fuel Pump – A step up in flow capacity
  • Pro-Series In-Line Fuel Pump – Designed for extreme power levels
  • Brushless In-Line Fuel Pumps – Latest technology with variable speed control

Key Features of Aeromotive Inline Fuel Pumps

1. High Flow Capacity for Serious Horsepower

Aeromotive inline pumps are rated by flow rate, measured in gallons per minute (GPM) or pounds per hour. For example, the Pro-Series In-Line Fuel Pump (part number 11102) is engineered for high-horsepower racing engines. It can support up to 2,200 horsepower for naturally aspirated fuel-injected engines and up to 1,700 horsepower for forced induction setups. For carbureted engines, it handles up to 2,600 horsepower naturally aspirated and 2,000 horsepower with forced air induction.

2. External Mounting Flexibility

Because these pumps are designed for external mounting, they are easier to access for maintenance or replacement compared to in-tank units. They come with mounting brackets, noise isolators, and hardware included. You can mount them along the frame rail, in the engine bay, or anywhere else that keeps them cool and protected.

3. Continuous Duty Rating

Aeromotive inline pumps are rated for continuous duty operation, meaning they can run for long periods without overheating or failing. This makes them suitable not just for drag racing, but also for road racing, towing, and daily driving.

4. Compatibility with Various Fuels

Many Aeromotive pumps work with gasoline, E85, and even methanol. The brushless Pro-Series pumps, for example, are specifically designed to handle ethanol and methanol fuels, which can be corrosive to standard pump materials.

When Do You Need an Aeromotive Inline Fuel Pump?

You might need an inline pump in several situations:

  • Your stock fuel pump cannot keep up. If you have upgraded your engine with a turbocharger, supercharger, or high-performance camshaft, the stock in-tank pump may not deliver enough fuel at high RPMs. An inline pump can supplement or replace it.
  • You are running E85 or methanol. These fuels require significantly more volume than gasoline. A standard pump may not flow enough, but an Aeromotive inline pump can handle the extra demand.
  • You want a secondary pump for safety. Many racers install an Aeromotive inline pump as a secondary pump in series with the in-tank pump. This setup provides redundancy and ensures the engine never runs lean.
  • You are building a dedicated race car. For cars that see track duty exclusively, an external inline pump is often the most reliable choice because it is easier to service and less prone to heat soak.

How to Choose the Right Aeromotive Inline Fuel Pump

Choosing the right pump depends on your horsepower goals and fuel type. Here is a simple guide:

  • For engines up to 500 horsepower naturally aspirated or 375 horsepower forced induction: The Aeromotive Inline EFI Fuel Pump (part number 11109) is a budget-friendly option. It flows 325 lbs./hr. at 45 psi and uses 5/16-inch hose barb fittings.
  • For engines between 500 and 1,000 horsepower: The A1000 In-Line Fuel Pump is a solid choice. It is a proven design that has been used in countless race cars.
  • For engines over 1,000 horsepower: Step up to the Pro-Series In-Line Fuel Pump or the Eliminator. These pumps are designed for extreme power levels and feature dual-chamber designs for maximum flow.
  • For the latest technology: Consider a brushless inline pump with a True Variable Speed Controller. These pumps reduce speed during low-load operation, keeping fuel cooler and extending pump life. They support up to 2,400 horsepower on gasoline and 1,680 horsepower on E85.

Installation Tips for Aeromotive Inline Fuel Pumps

Installing an inline fuel pump is a straightforward job if you have basic mechanical skills, but there are a few critical points to keep in mind:

1. Mount the pump low and cool. Mount the pump as close to the fuel tank as possible and below the fuel level if you can. This helps with gravity feed and reduces the risk of vapor lock. Keep the pump away from heat sources like exhaust manifolds.

2. Use a pre-filter and a post-filter. Always install a fuel filter before the pump to protect it from debris, and another filter after the pump to catch any particles before they reach the injectors. Aeromotive recommends using a high-quality 10-micron filter for EFI systems.

3. Wire it correctly. Use a relay and a dedicated power wire from the battery. Do not rely on the stock fuel pump wiring, which may not be thick enough to handle the current draw of an external pump. Aeromotive pumps typically draw 8 to 15 amps depending on the model.

4. Use proper fuel line. For high-pressure EFI systems, use AN-style fittings and hose rated for fuel injection pressure. Rubber hose and worm-gear clamps are not safe for high-pressure applications.

5. Prime the system before starting. After installation, turn the ignition on and off a few times to let the pump build pressure. Check for leaks before starting the engine.

Why You Should Consider KEMSO as an Alternative

While Aeromotive makes excellent pumps, they are expensive and often overkill for everyday vehicles. If you are looking for a reliable, affordable, and high-performance replacement fuel pump, KEMSO is a brand worth your attention.

KEMSO fuel pumps are designed as high-performance, OEM replacement units. They are built to match or exceed the exact specifications of your vehicle's original pump. Many KEMSO pumps deliver over 20% more flow at 43 psi compared to the stock pump, which can improve engine performance and throttle response. For example, a KEMSO pump for a Honda or Kawasaki model can deliver up to 200 liters per hour, significantly surpassing the original flow rate of 60-80 liters per hour.

Every KEMSO fuel pump comes with a lifetime warranty backed by a serialized pump body, so you only have to buy it once. This is a massive advantage over OEM and standard aftermarket parts, which typically have only a 1- or 2-year warranty. KEMSO stands behind its product for as long as you own the pump.

KEMSO pumps are compatible with both gasoline and ethanol-blended fuels like E85. They use materials that resist ethanol degradation, ensuring long-term reliability even with modern fuel formulations. Each pump is individually tested for flow and performance before it leaves the factory, ensuring you get a product that works right out of the box.

Whether you need a pump for a motorcycle, ATV, UTV, personal watercraft, or car, KEMSO has a solution. Their product lineup covers brands like Honda, Kawasaki, KTM, Ducati, BMW, Subaru, Sea-Doo, Can-Am, and many more.

Visit KEMSO today to find the exact fuel pump for your vehicle: https://www.kemsoracing.com/

Final Thoughts

An Aeromotive inline fuel pump is a top-tier choice for anyone building a high-horsepower engine or upgrading a race car. These pumps are built to flow massive amounts of fuel, handle extreme pressures, and run continuously without issue. However, for most vehicle owners—whether you drive a car, ride a motorcycle, or operate a watercraft—a KEMSO fuel pump offers the perfect balance of performance, reliability, and value. With a lifetime warranty, superior flow rates, and a complete installation kit, KEMSO is the smart choice for any engine owner.

For the best selection of KEMSO fuel pumps, visit: https://www.kemsoracing.com/


Back to blog