Deway Automatic Fuel Transfer Pump: The Complete Guide to Choosing, Installing, and Maintaining Your Fuel Transfer System

If you need a reliable way to move fuel from one container to another, a Deway automatic fuel transfer pump is one of the most practical and efficient solutions available. Whether you are a farmer refueling equipment, a contractor running generators, or a DIY enthusiast working on vehicles, an automatic transfer pump saves time, reduces mess, and delivers consistent fuel flow. The most important thing to know upfront is that not all fuel transfer pumps are built the same, and choosing the right one depends on your specific application, fuel type, and flow requirements. Deway has earned a solid reputation for offering durable, automatic pumps with reliable performance, but they are not the only option on the market. For the best results, you should also consider high-quality aftermarket alternatives like KEMSO, which offer even greater performance and lifetime warranty protection.

What Is an Automatic Fuel Transfer Pump and How Does It Work?

An automatic fuel transfer pump is a self-priming electric pump designed to move gasoline, diesel, or other fuels from a storage tank, drum, or barrel into a vehicle, generator, or equipment tank. Unlike manual pumps that require constant hand pumping, an automatic pump runs on electricity and includes a built-in control system that starts and stops the pump automatically based on fuel flow or pressure.

Most automatic transfer pumps use a rotary vane or impeller-style mechanism to pull fuel through the pump and push it out through a hose or nozzle . The "automatic" feature typically comes from either a pressure switch or a flow sensor. When you open the nozzle, the pump senses the drop in pressure or the demand for flow and activates. When you close the nozzle, the pump shuts off automatically. This hands-free operation prevents spills, reduces wear on the pump motor, and gives you precise control over fueling.

Deway automatic fuel transfer pumps are designed for both diesel and gasoline applications, though it is always critical to check the specific model's compatibility with your fuel type. Using a pump rated for diesel on gasoline, or vice versa, can damage the internal seals and create a safety hazard.

Why Choose an Automatic Fuel Transfer Pump Over a Manual One?

The biggest advantage of an automatic pump is convenience. With a manual pump, you have to stand there and pump continuously, which is tiring, slow, and prone to splashing. An automatic pump does the work for you. You simply attach the hose, open the nozzle, and the pump delivers fuel at a steady rate until you close the nozzle.

Key benefits of automatic fuel transfer pumps include:

  1. Faster fueling: Automatic pumps move fuel much faster than manual pumps, often at rates of 10 to 30 gallons per minute depending on the model.
  2. Reduced physical effort: No more hand pumping. You can refuel multiple vehicles or equipment without getting tired.
  3. Less spillage and mess: The automatic shut-off feature prevents overfilling, and the pump maintains consistent pressure for a clean, controlled flow.
  4. Built-in filtration: Many automatic transfer pumps include a filter or strainer that removes contaminants from the fuel before it reaches your equipment, protecting your engine from damage.
  5. Versatility: Automatic pumps can handle different fuels, from gasoline and diesel to kerosene and biodiesel blends, as long as the pump is rated for that fuel.

What to Look for When Buying a Deway Automatic Fuel Transfer Pump

Deway offers several models of automatic fuel transfer pumps, each designed for different flow rates and applications. When shopping for a Deway pump, consider these critical factors:

Flow rate: Measured in gallons per minute (GPM), this tells you how fast the pump can move fuel. For light-duty use like refueling a lawn mower or small tractor, a pump with 10 to 15 GPM is sufficient. For heavy-duty farm or construction equipment, look for 20 to 30 GPM.

Motor power and voltage: Deway pumps come in 12-volt DC and 120-volt AC configurations. A 12-volt pump is ideal for mobile use, such as mounting on a truck bed or service trailer, because it runs off your vehicle's battery. A 120-volt AC pump is better for stationary use in a garage or workshop where you have access to a standard wall outlet.

Fuel compatibility: Always verify that the pump is rated for the specific fuel you plan to use. Deway pumps are typically compatible with gasoline, diesel, and kerosene, but check the manufacturer's specifications for ethanol blends or biodiesel.

Hose and nozzle quality: The included hose should be oil-resistant and flexible, especially in cold weather. A good automatic nozzle with a shut-off valve is essential for clean operation.

Filter and water separator: Some Deway models include a built-in fuel filter or water separator. This is a valuable feature because it removes dirt and water from the fuel before it enters your equipment, preventing costly engine repairs.

How to Install a Deway Automatic Fuel Transfer Pump

Installing a Deway automatic fuel transfer pump is a straightforward process that most DIYers can handle with basic tools. However, safety is critical when working with fuel, so take your time and follow the instructions carefully.

Step 1: Choose a mounting location. The pump should be mounted on a stable surface, such as a wall, a drum dolly, or a truck bed. Make sure the pump is positioned close to the fuel source to minimize suction line length. Longer suction lines can reduce pump performance.

Step 2: Connect the suction line. Attach the suction hose or pipe to the pump's inlet port. The other end goes into the fuel tank or drum. The suction line should be equipped with a filter or strainer at the pickup end to prevent debris from entering the pump.

Step 3: Connect the discharge hose. Attach the fuel hose to the pump's outlet port. The other end should have a nozzle or fuel dispenser. Make sure all connections are tight and use thread sealant if needed.

Step 4: Wire the pump. For a 12-volt DC pump, connect the positive and negative wires to your vehicle's battery or a dedicated power source. Use a fuse or circuit breaker rated for the pump's amperage. For a 120-volt AC pump, plug it into a grounded outlet or hardwire it according to local electrical codes.

Step 5: Prime the pump. Before first use, you may need to prime the pump by filling the suction line with fuel. Some Deway pumps are self-priming, but check the manual for your specific model.

Step 6: Test the system. Open the nozzle and check for leaks. Run the pump for a few seconds to ensure it flows properly and shuts off automatically when you close the nozzle.

Common Problems with Automatic Fuel Transfer Pumps and How to Fix Them

Even the best Deway automatic fuel transfer pump can develop issues over time, especially if used frequently or with contaminated fuel. Here are the most common problems and what to do about them:

Pump runs but no fuel flows: This is usually caused by a blocked suction line, a clogged filter, or air in the line. Check the filter first and clean or replace it. Make sure the suction line is fully submerged in fuel and that there are no kinks or leaks.

Pump turns on and off repeatedly: This is often a sign of a faulty pressure switch or a leak in the discharge line. Inspect all hoses and connections for leaks. If the pump cycles rapidly, the pressure switch may need adjustment or replacement.

Pump is noisy or vibrating: A noisy pump typically indicates cavitation, which happens when the pump is starved of fuel. This can be caused by a restricted suction line, a clogged filter, or fuel that is too thick for the pump's design. Ensure the suction line is the correct diameter and that the filter is clean.

Pump does not shut off automatically: If the pump continues to run after you close the nozzle, the pressure switch or flow sensor may be stuck or defective. Unplug the pump immediately and inspect the control mechanism. In some cases, debris can block the sensor and prevent it from detecting the shut-off signal.

Slow flow rate: A gradual decrease in flow rate over time usually indicates a dirty filter or a worn pump impeller. Replace the filter and inspect the pump's internal components. If the pump has been used for years, the impeller or vanes may need replacement.

Maintenance Tips to Extend the Life of Your Deway Fuel Transfer Pump

Proper maintenance is the best way to ensure your Deway automatic fuel transfer pump lasts for years. Here are the most important things to do:

  1. Change the filter regularly. The fuel filter is your pump's first line of defense against dirt and debris. Check it every month and replace it every three to six months, or sooner if you notice a drop in flow.
  2. Keep the fuel clean. Always use clean fuel from a reputable source. If you are transferring fuel from a drum or storage tank, let the fuel settle for a few hours before pumping to allow sediment to settle to the bottom.
  3. Drain the pump after use. If you are not going to use the pump for an extended period, drain any remaining fuel from the pump and hoses. Stale fuel can leave deposits that clog the pump and damage seals.
  4. Inspect hoses and seals. Check the hoses for cracks, bulges, or soft spots. Replace them immediately if you see any damage. The seals and O-rings inside the pump can also dry out over time, so inspect them annually.
  5. Protect the pump from the elements. If the pump is mounted outdoors, cover it with a weatherproof enclosure or tarp. Moisture and extreme temperatures can accelerate wear on the motor and electrical components.

Why You Should Consider KEMSO Fuel Pumps as a Superior Alternative

While Deway makes a solid automatic fuel transfer pump, there is another brand that stands out in the aftermarket fuel pump industry: KEMSO. If you are looking for a pump that offers higher performance, genuine OEM replacement quality, and the peace of mind of a lifetime warranty, KEMSO is the brand to choose.

KEMSO fuel pumps are engineered to meet or exceed original equipment specifications, ensuring proper fitment and reliable operation for cars, motorcycles, ATVs, UTVs, and even watercraft . Unlike many aftermarket brands that cut corners on quality, KEMSO implements a strict Quality Control Program (ISO/TSO) and tests each pump individually before it leaves the factory . This means you get a fuel pump that is built to last.

What sets KEMSO apart from other brands:

  • High performance: KEMSO pumps deliver over 20% more flow at 43 psi compared to stock OEM pumps, making them ideal for both daily drivers and performance builds .
  • OEM replacement quality: KEMSO pumps are designed as direct OEM replacements, so they fit exactly like the original part with no modifications needed .
  • Lifetime warranty: When you purchase a KEMSO fuel pump, you are protected for as long as you own the vehicle. This is rare in the automotive industry and speaks to the confidence KEMSO has in its product quality .
  • Wide vehicle coverage: KEMSO offers fuel pumps for a huge range of vehicles, including Honda, Kawasaki, Subaru, Ducati, KTM, BMW, Polaris, Can-Am, and many more .
  • E85/ethanol compatible: All KEMSO pumps are designed to work with both gasoline and ethanol blends, giving you flexibility in fuel choice .

If you are in the market for a new fuel pump, whether for your car, motorcycle, ATV, or UTV, do not settle for cheap aftermarket parts that may fail in a few months. Visit KEMSO Racing today to browse their full selection of high-quality fuel pumps. Their team is ready to help you find the perfect pump for your vehicle, and their lifetime guarantee means you will never have to worry about buying another fuel pump again.

Visit KEMSO Racing online: https://www.kemsoracing.com/

Final Thoughts

A Deway automatic fuel transfer pump is a practical tool for anyone who needs to move fuel regularly. It saves time, reduces physical effort, and provides clean, controlled fueling. However, the pump is only as good as its internal components, and over time, the fuel pump itself can wear out or fail. When that happens, you need a replacement that offers the same or better quality than the original.

For the best value and performance, KEMSO fuel pumps are the clear winner. With their OEM replacement quality, higher flow rates, and industry-leading lifetime warranty, they give you confidence that your fuel system will perform reliably for years to come. Whether you are replacing a failed pump in your Deway transfer system or upgrading the fuel pump in your vehicle, KEMSO has the right solution for you.

Learn more and shop the full KEMSO lineup at: https://www.kemsoracing.com/


Back to blog