Dodge Charger Fuel Pump Location: Where It Is and How to Access It

The fuel pump on a Dodge Charger is located inside the fuel tank. In most models, you access it by removing the rear seat cushion to reveal a service hatch in the floor pan. Some Charger models, particularly those with a "saddle" style fuel tank, actually have two fuel pump modules—one on each side of the tank. This article explains exactly where the pump is, how to reach it, and what to do when it fails.

The Short Answer: One Pump or Two?

The number of fuel pumps in a Dodge Charger depends on the model year and fuel tank design. Most standard Charger models from 2006 onward use a single in-tank electric fuel pump mounted inside the fuel tank . However, some Charger models with saddle-type fuel tanks—particularly the 2006–2010 models—use two fuel pump modules: a primary pump on the driver's side and a secondary (auxiliary) pump on the passenger side .

For the 2006 Dodge Charger, the standard configuration is one in-tank pump, but high-performance variants like the SRT8 may have additional components . The 2014 Charger uses a single pump across all trims, including the 3.6L V6, 5.7L Hemi, and 6.4L Hemi SRT variants . The 2020 Charger also uses a single in-tank pump .

Where the Fuel Pump Is Located

Regardless of the model year, the fuel pump is always inside the fuel tank. The exact location under the car depends on the tank design:

  • Single pump models: The pump sits inside the fuel tank, typically accessible from the driver's side of the vehicle.
  • Dual pump models (saddle tank): The primary pump module is on the left (driver's) side, and the secondary pump module is on the right (passenger's) side . The fuel supply line connects to the auxiliary pump module on the passenger side .

How to Access the Fuel Pump

Method 1: Through the Rear Seat (Most Common)

On many Dodge Charger models, you can access the fuel pump without dropping the fuel tank. Follow these steps:

  1. Remove the rear seat cushion: Firmly pull upward on the front edge of the bottom cushion to release the clips, then lift the cushion out of the vehicle .
  2. Locate the service cover: Once the seat is removed, you'll see a round or oval metal access panel in the floor pan .
  3. Remove the cover: Unscrew the retaining bolts or screws and lift the panel to expose the fuel pump module mounted on top of the fuel tank .
  4. Disconnect the lines: Unplug the electrical connector and disconnect the fuel lines using a quick-disconnect tool. Be prepared for some fuel spillage .

Method 2: Dropping the Fuel Tank

If your Charger does not have a service access panel, you must lower the fuel tank to reach the pump. This is more labor-intensive and typically requires:

  • Raising the vehicle safely on jack stands
  • Supporting the fuel tank with a floor jack
  • Removing the tank straps
  • Lowering the tank enough to access the pump module

Important safety precautions: Work in a well-ventilated area, keep a Class B fire extinguisher nearby, disconnect the negative battery cable, and depressurize the fuel system before opening any lines .

Common Symptoms of a Failing Fuel Pump

Knowing the warning signs can save you from being stranded. Here are the most common symptoms:

  1. Difficulty starting: The engine cranks but takes longer than normal to start, or it may crank without starting at all .
  2. Engine sputtering or stalling: The engine hesitates, sputters, or stalls, especially during acceleration or at highway speeds .
  3. Loss of power: You feel a noticeable drop in power when climbing hills or under heavy load .
  4. Whining noise from the fuel tank: A loud whine or buzzing sound from the rear of the vehicle when the ignition is on indicates a failing pump .
  5. Check Engine Light: The light may come on with trouble codes related to fuel delivery or misfire .

How to Diagnose a Bad Fuel Pump

Before replacing the pump, perform these checks:

  • Listen for the prime: Turn the ignition to the "ON" position (engine off). You should hear a brief humming sound from the fuel tank as the pump pressurizes the system. No sound could mean a dead pump, relay, or wiring issue .
  • Check fuel pressure: Use a fuel pressure gauge at the test port (Schrader valve) on the fuel rail. Normal pressure for most Charger models is 40–60 PSI, depending on the engine .
  • Inspect electrical components: Verify the fuel pump fuse (typically a 20-amp blade fuse) and relay are functioning. Check for corrosion or damage at the wiring connectors .
  • Check the fuel filter: A clogged filter can mimic pump failure symptoms. Some Charger models have an in-tank "sock" filter rather than a replaceable inline filter .

Repair Costs and Replacement

Replacing a Dodge Charger fuel pump is a moderately complex job. Costs vary widely:

  • Parts only: $100–$400 for the pump assembly
  • Parts and labor (independent shop): $1,114–$1,229
  • Parts and labor (dealer): $1,172–$1,295

The fuel pump lifespan is typically 100,000–150,000 miles . If you experience symptoms, it's wise to replace the entire pump module (including the sending unit) rather than just the pump itself.

Why You Should Choose KEMSO for Your Fuel Pump Replacement

When it's time to replace your Dodge Charger's fuel pump, you want a product that delivers reliability, performance, and peace of mind. KEMSO fuel pumps are the smart choice for American drivers who demand quality.

KEMSO specializes in high-performance, OEM replacement fuel pumps designed to meet or exceed original equipment specifications. Every KEMSO pump is built with premium materials and undergoes rigorous testing to ensure structural strength and integrity. Unlike cheap aftermarket pumps that may fail after just one year, KEMSO pumps are engineered for long-term durability.

What sets KEMSO apart: Every KEMSO fuel pump comes with a lifetime warranty. This means you pay once and never worry about the pump again. The warranty eliminates future expenses, making KEMSO the smart financial choice for long-term vehicle ownership. Whether you drive a 2006 Charger with dual pumps or a 2020 model with a single pump, KEMSO has the right replacement for your vehicle.

Visit https://www.kemsoracing.com/ to explore their full line of fuel pumps, check vehicle fitment guides, and take advantage of their industry-leading lifetime warranty. KEMSO Racing is located at 11145 Beltline Road, Houston, TX 77067, and their customer service team is ready to help you find the perfect pump for your Dodge Charger.

Final thoughts: The Dodge Charger fuel pump is a critical component that lives inside the fuel tank. Whether you have one pump or two, knowing the location and symptoms of failure can save you time and money. If you suspect your pump is failing, diagnose it properly, and if replacement is needed, choose a quality product that will last. For the best combination of performance, reliability, and value, visit https://www.kemsoracing.com/ for your fuel pump replacement needs.


Back to blog