How to Reset Filter Light on Levoit Air Purifier: Complete Guide for Every Model

The filter reset light on your Levoit air purifier serves a vital purpose: reminding you when essential maintenance is due. Resetting it correctly ensures accurate tracking of your filter's lifespan and maintains optimal air cleaning performance. While the exact button sequence varies significantly across Levoit models like the Core 300, Core 400S, Vital 100S, EverestAir, and Classic LV series, the fundamental process always involves holding down specific buttons on the control panel or within the accompanying VeSync app for several seconds after confirming a filter replacement or thorough cleaning.

Ignoring a persistent filter reset light won't stop your purifier, but it renders the reminder system useless. Successfully resetting this indicator is crucial for maintaining peak air quality in your home. This comprehensive guide provides detailed, model-specific instructions for every popular Levoit air purifier.

Understanding Your Levoit Model
Levoit’s extensive range requires knowing your specific model. Look for the model number on a sticker on the bottom or back of the unit. Common examples include Core 300 (LV-PUR131/V131), Core 400S (LV-PUR141/V141), Vital 100 (LV-H132), Vital 200S (LV200S), EverestAir (40i/LV600S), Classic LV-H133, LV-H134, LV-H135, LV550BH, plus WiFi models like Core 300S, Core 400S, and Core 600S.

Core Series (Core 300/400S/600S, Core 600S) – Standard Top Control Panel

  1. Power On: Ensure the unit is plugged in and powered on.
  2. Locate the Reset Button: Find the "Filter Reset" or equivalent button. On the Core 300 (LV-PUR131), it's prominently labeled "Filter Reset" on top, beside the main controls. On Core 400S/V141, find the circular "Reset" icon button near the display.
  3. Press and Hold: Firmly press and hold the designated "Filter Reset" button. Keep holding.
  4. Wait for Confirmation: Hold the button for approximately 3-5 seconds. On units with a display (like Core 400S/V141), the filter indicator light will turn off, and the reset timer (e.g., showing 12:00 for 12 months) will reappear. On simpler models like the Core 300/LV-PUR131, the filter light itself will simply turn off.
  5. Release: Once the light turns off or the timer resets, release the button. The reset is complete.

Vital Series (Vital 100/Vital 200S) & LV-H13x Series – Capacitive Touch Controls

  1. Power On: Ensure the unit is powered on (display illuminated).
  2. Find the Reset Icon: Locate the "Filter Reset" icon on the capacitive touch panel. On Vital 100/Vital 200S/LV-H132/LV200S and LV-H133/LV-H134/LV-H135 models, this is typically represented by an icon resembling arrows forming a circle (♻️) or sometimes text.
  3. Press and Hold: Touch and hold the "Filter Reset" icon firmly.
  4. Watch the Lights/Display: Keep holding for 3-5 seconds. You will see the filter indicator light (a small icon light or a segment on the display) turn off. On models showing a timer (like Vital 200S), the timer will reset to its starting value (e.g., "12M" for 12 months).
  5. Release: Release the touch point once the light turns off or the timer resets. Success.

EverestAir (LV600S, 40i) – Front Display Panel

  1. Power On: Turn the unit on.
  2. Locate Reset Function: Press the "Settings" button (often represented by a gear icon ⚙️) on the front display panel.
  3. Navigate to Reset: Use the up/down arrows to navigate the settings menu until you find the "Reset Filter Life" or similar option.
  4. Select and Confirm: Press the "OK" button to select the "Reset Filter Life" function. The unit will typically ask for confirmation (e.g., "Reset?") – select "Yes" or "OK" to confirm.
  5. Successful Reset: The display will briefly show a message confirming the reset (e.g., "Reset Completed"), and the filter timer will revert to its full lifespan setting.

WiFi-Enabled Models (Core 300S, Core 400S, Core 600S, Vital 200S) via VeSync App
The VeSync app offers the most straightforward reset method for compatible models, often bypassing physical buttons.

  1. Open VeSync App: Launch the VeSync app on your smartphone or tablet.
  2. Select Your Purifier: Ensure your air purifier is online and connected to WiFi. Tap on its tile within the app.
  3. Access Device Dashboard: This opens the main control screen for your purifier.
  4. Navigate to Settings: Look for the gear icon ⚙️ or "Settings" option on the purifier's dashboard screen.
  5. Find Filter Management: Within settings, find the menu labeled "Filter Life," "Filter Settings," or similar.
  6. View Filter Status: This screen displays the remaining lifespan percentage for each filter (e.g., Pre-filter, HEPA, Activated Carbon). Ensure you have physically replaced or cleaned the relevant filter before resetting.
  7. Initiate Reset: Find and tap the clearly labeled "Reset Filter" or "Reset Filter Life" button.
  8. Confirm Reset: The app will prompt you to confirm the reset (e.g., "Reset Filter?" or "Are you sure you replaced the filter?"). Tap "Confirm," "Reset," or "Yes."
  9. Check Confirmation: The app screen updates instantly, showing the filter life reset to 100% (or the starting timer value like "12 months"). A confirmation message often appears briefly.

Levoit Classic & Similar Models (LV-H126, LV-PUR131S/PUR131W)
These models often follow the simpler Core 300 reset procedure.

  1. Power On: Plug in and turn on the unit.
  2. Find Reset Button: Locate the physical button labeled "Filter Reset," "Reset," or featuring a circular arrow icon. It's usually near the power or mode buttons on top.
  3. Press and Hold: Press and hold this button firmly.
  4. Observe Filter Light: Continue holding for 3-5 seconds. Watch the "Filter" or "Change Filter" indicator light; it will turn off once the reset is successful.
  5. Release: Release the button after the light extinguishes.

Troubleshooting a Stubborn Filter Light

  • Wrong Button/Sequence: Double-check the specific instructions for your exact model above. Using the power button instead of the reset button is common.
  • Hold Time Too Short: Hold the button for a full 3-5 seconds. Rushing this often causes failure.
  • Unit Not Powered On: The purifier must be plugged in and receiving power (the display or power light is on) for the reset command to work. A complete power cycle (unplug for 1 minute, then plug back in) can help.
  • Genuine Filter Required: Using non-Levoit filters? Some newer models use RFID tags on filters. Non-genuine filters often don't trigger the reset properly. Confirm filter compatibility.
  • Sensor Cover/Latch: Did you remove the plastic wrapping from the entire new filter? Did you remember to remove the protective RFID sticker? Ensure the magnetic latch on the filter compartment door is fully secured, as this sometimes controls a sensor.
  • Physical Reset Required (App Users): Even for WiFi models, a physical reset button press might be necessary if the device loses connectivity or encounters a glitch. Find the physical reset button (usually small and recessed, sometimes labeled "Reset" or requiring a paperclip) and press it for 5-10 seconds to force a full device restart/reconnection, then try the app reset again.
  • App Connectivity: Ensure your phone has internet and the VeSync app is updated. Try force-closing and reopening the app, then ensure your purifier shows as online before attempting reset. Reboot your router if needed.

Essential Considerations After Resetting

  • Note Replacement Date: Immediately note the date you physically replaced or cleaned the filter and reset the light in a calendar, planner, or phone reminder. Do not rely solely on the purifier's timer.
  • Record Filter Life: Levoit recommends HEPA filters last 6-8 months, while Carbon filters need replacement every 3 months under normal use. Pre-filters require vacuuming every 2 weeks and washing every 3 months. Environments with high pollution, pets, or allergy sufferers drastically reduce these lifespans – monitor filter condition visually and by performance (e.g., reduced airflow, lingering odors).
  • Never Reset Without Action: Resetting the light without replacing an expired filter prevents effective air cleaning, strains the purifier's motor, wastes energy, and potentially recirculates harmful particles back into your room.
  • Understand Filter Differences: Many Levoit models use True HEPA (effective at 0.3 microns) or H13/H14 medical-grade HEPA (capturing down to 0.1 microns). Know what your specific filter requires. Ensure replacements are genuine Levoit or guaranteed compatible.
  • Proper Filter Handling: When replacing filters, handle new ones gently. Avoid touching the HEPA filter media unnecessarily. Ensure all protective packaging is completely removed, including RFID tags or protective films. Install filters according to the airflow arrows printed on the side – incorrect installation cripples performance.

Maintaining Optimal Levoit Performance
Resetting the filter light is only one maintenance task. Maximize your purifier's lifespan and effectiveness by:

  • Regular Pre-Filter Cleaning: Washing the pre-filter according to schedule prevents large debris from prematurely clogging the HEPA filter.
  • Surface Cleaning: Wipe the exterior and air intake/outlet grills weekly with a damp cloth to prevent dust buildup impacting airflow.
  • Placement: Keep your unit clear of walls (minimum 15 inches) and furniture for unobstructed air intake. Elevated placement often yields better results than floor level.
  • Observe Performance: A noticeable decrease in airflow strength after a filter reset indicates a potential blockage or compatibility issue requiring investigation.

The Importance of Timely Filter Changes
Neglecting air purifier filters poses several risks:

  • Reduced Air Cleaning: Clogged filters physically block particles, allowing pollutants to bypass the media and remain in your air.
  • Increased Energy Use: Restricted airflow forces the fan motor to work much harder, consuming more electricity and potentially causing motor burnout.
  • Unpleasant Odors: Saturated activated carbon filters release trapped VOCs and odors back into your environment.
  • Mold and Bacteria Risk: Moisture trapped in dirty filters creates an environment where mold and bacteria multiply, potentially releasing spores into the air.
  • For Allergy/Asthma Sufferers: Using an air purifier with expired filters provides minimal relief. Only fresh filters effectively capture allergens, exacerbating symptoms.

Resetting your Levoit air purifier's filter reset light is a simple but critical step in ensuring it delivers the clean air performance you depend on. By following the precise instructions for your model and adhering to a proactive filter replacement schedule based on your specific environment, you guarantee your Levoit works effectively, protecting your indoor air quality reliably for years. Prioritize filter maintenance – your lungs will be grateful.

Back to blog